Berkland Automotive Seam Sealer Kit - Durable & Flexible Polyurethane Compound For Bare, Primed, Or Painted Surfaces - White RV Roof Sealant

2 Pack Value! Properly patching voids demands durability. Set it and forget it with a body sealer that is non-shrinking, non-cracking, and low-odor. This auto sealant can fill all interior or exterior seams and joints. This adhesive does it all. Power through your project with this automotive body panel adhesive kit. Directions: Primer or Painted Surface - Clean with a VOC-compliant cleaner and scuff using an abrasive pad - Re-clean to remove debris before applying the seam sealer auto body compound - Pierce the seal, install the nozzle, then remove the metal seal - Insert the poly urethane adhesive sealant into a caulking gun and trim the nozzle - Apply the seam binding compound and tool it to achieve the desired finish - Allow 45 minutes for curing. For best results, wait 24 hours and scuff prior to painting Weld Through - Strip coatings around the weld flanges - Apply the auto body seam sealer and brush to cover all bare metal - Align and use a shunt clamp to hold before starting to weld Bare Metal - Clean with a VOC-compliant cleaner and grind or scuff weld nuggets or locations - Re-clean to remove debris before applying the automotive panel bond adhesive compound - Pierce the seal, install the nozzle, then remove the metal seal and trim the nozzle - Apply the paintable seam sealer and tool it to achieve the desired finish - Allow 45 minutes for curing. This single-component panel bond compound provides superior adhesion on bare, primed, or painted metal surfaces on your vehicle or RV 2 Pack Value & Complete Kit - Comes with nitrile gloves and an application tip to make the process seamless This joint and seam filler set comes with everything you need and more. The sealant is compatible with any standard caulking gun Permanently Fill Gaps - Don't settle for a body panel adhesive sealant that doesn't hold up. Primer and Paint Ready - Get your project ready for the road in just 24 hours. Smooth out and let the quick-curing seam sealant settle in for 45 minutes. Then you're ready to prime and paint the automotive body filler for a flawless finish that blends right in Enhanced moisture curing properties ensure a durable hold for interior or exterior use. Use a urethane sealer that is worlds ahead of any solvent-based solutions