Isolated Vintage Bicycle Air Horn Stock Photo

Steel body plated finish. A cooler look that is practical and durable at the same time. Triple-tube horn x 1 Length: 11in/279mm Rubber ball diameter: 2.36in/60mm Weight 176.6g Material: Iron Surface: plating We tried to improve the sound of the speakers and finally decided on the most flexible method. That was to add a rubber plug for inserting into the sound pipe of the second sound stage. Customers who have purchased speakers in the past and feel that they are not loud enough can contact our customer service department and we will send you a speaker rubber plug directly at no charge! 【Size】：Size: Horn length: 11 inches / 279mm, rubber ball diameter: 2.36 inches / 60mm, suitable for 22.2mm diameter handlebars. 【Material】：Made of steel tube, the outer layer of electroplating, so that the horn is not afraid of the wind and sun more robust and durable. Rubber ball texture is soft, easy to use and does not hurt your hands. 【Installation flexibility】：We use a long screw and two snaps to link the horn and handlebars, so the design is more flexible can be adapted to more bicycle handlebars. Also, only a screwdriver and an Allen wrench are needed to complete the installation. 【Note】：Because it is a three-tube structure, it requires a quick squeeze of air to achieve the best results when using it. We will be including a rubber stopper with future products, so for customers who have already purchased but don't think it's loud enough, contact us and we'll send you a rubber stopper. Note: The plugs are removable using the clamps. Plugs placed in medium length tubes will allow the horn to produce two sounds at the same time, while placing them in the shortest tubes will make the sound produced sound like only one.